Infrared Powder Coating Oven Model#FPB44-H1-14.4

Modular and Portable Electric IR Bank Concept:

The “modular” portable approach to paint and powder curing creates the flexibility to apply the best infrared emitter for the dry-off, boost, flash-off, gel, pre-gel or total cure application; and this approach includes the simplicity, efficiency and quickness desired to accomplish the finishing process.  These electric IR banks offer:                                

  Portability 

o    Easily set up banks to configure to the finishing process and product

o    Quickly move and store the banks when not in use                                                            

o    Move the banks to assist in other finishing operations

  Flexibility

o    Models can be oriented to heat small-medium-large parts and can be grouped or aligned to create an infrared tunnel for use on even the longest coated parts

o    Banks range from 33”H x 31”L heat patterns, up to 44”H x 66”L patterns; Fostoria will provide FREE testing and engineering to design and specify the equipment needed for the finishing operation

o    The individual modular sections on the banks accept short or medium wavelength infrared emitters, in a large range of wattages and all industrial voltages (1 or 3), to meet the exact watt densities required for the application.

  The Advantages of Electric Infrared Heat

o    Efficiency – focus the IR at the product and heat the coating, not the ambient air; instant on-off; no time wasted bringing emitters up to temperature

o    Repeatable results – consistent performance through effective control of the amount of heat required, even if pass through or dwell times vary; many control options are available

o    Smaller footprint – these IR banks use very little floor space, especially when compared to conventional curing ovens

Advantages Continued . . .

o    Generally less capital expense – modular design and comparatively less component and structural costs translate into lower capital expenditures

o    Clean and safe – no by-products of combustion; very little maintenance required and no moving parts on the IR banks

Construction Specifications

·          Heat Sections consist of an integral gold anodized aluminum reflector and GAA end caps.  Standard reflector disperses IR energy across a 130⁰ pattern with the reflected IR in a tighter 65⁰ pattern.

·          Standard section is 11” wide and either 44” or 55” long; optional widths are 5-1/2” and 16-1/2”; optional lengths include 16”, 22”, 31” and 66” lengths.

·          All sections are designed so they can be bolted together side-by-side or end-to-end; making the assembly of small, medium and large banks possible.

·          Sections are designed to accept ONE or TWO short wavelength (T-3 lamps), medium wavelength (quartz tubes) or long wavelength (metal sheath) IR emitters; at a wide range of wattages at all standard industrial voltages.  All sections/banks can be wired for single or 3 phase operation; and in series, parallel or combinations to suit the process and controls requirements.

·          Sections are mounted to a heavy-duty steel stand with durable and lockable casters for ease of mobility and stability.  Stands can be adjusted to accommodate various width heat sections.

·          Optional blowers can be integrated into heat sections to add air to the finishing or dry-off process; and to wick away moisture during the cure of water based coatings.

·          All standard model banks have a 100A rated disconnect, with ON/OFF switch with lockable handle.