Here is the big difference between bonded and non-bonded powders: imagine the metal flake as a corn flake shaped object. In non-bonded, the electrostatics of the gun make the metal flake either stand on it's side (as opposed to laying flat) or it makes the metal flakes "bunch" together. Your part will end up with alot of different shades (some flakes on edge and some flat), or with alot of metallic in one area and none in another area. Bonded metallics don't allow this to happen.

• GLOSS LEVEL = 160% ON 60 DEGREE METER
• CURE SCHEDULE = 400F/15 MINUTES @ PMT
• RECOMMENDED MIL THICKNESS = 1.8-2.2 MILS.
• SPECIFIC GRAVITY = 1.20
• THEORETICAL COVERAGE = 160 SQ. FT/ 1 LB
• SALT SPRAY RESISTANCE = 2000+HOURS
• *CLEAR COAT IS RECOMMENDED FOR BETTER UV PROTECTION AND IMPROVED MAR RESISTANCE

To purchase half a pound, add 0.5. So, if you want two and a half pounds, type "2.5". If you want half a pound, type "0.5".