View Currency

My Wishlist
My Cart
Checkout
Login
Menu

> Ceramics & Coatings > Ceramic Exhaust Coatings

Black Gloss Ceramic

Gloss Black Ceramic - High Temperature Exhaust System Coating

  • Will Withstand Temperatures Up To 2000F
  • Passes 6500+ Hr Salt Spray Test
  • 3 - 5 Yr Shelf Life
$120.00 - $340.00
Black Gloss Ceramics (1 Quart) Low Cure

Black Gloss Ceramics (1 Quart) 1 Shot Process Low Cure - Will Withstand Temperatures Up To 2000f - Passes 6500+ Hour Salt Spray Test ~ 3-5 Year Shelf Life

$120.00
Black Gloss Ceramics (4 Ounce)

High Heat Ceramic Gloss Black - Will Withstand Temperatures Up To 2000f - Passes 6500+ Hour Salt Spray Test ~ 3-5 Year Shelf Life

$34.50
Black Satin Ceramics (1 Quart)

High Heat Ceramic Satin Black - Will Withstand Temperatures Up To 2000f - Passes 6500+ Hour Salt Spray Test ~ 3-5 Year Shelf Life

$140.00
Black Satin Ceramics (4 Ounce)

High Heat Ceramic Satin Black - Will Withstand Temperatures Up To 2000f - Passes 6500+ Hour Salt Spray Test ~ 3-5 Year Shelf Life

$34.50
Cast Iron Ceramic (1 Quart)

CAST IRON CERAMIC (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

(1)
$120.00
Ceramic Primer (1 Quart) (Adds 300-400F To Overall Temp)

CERAMIC PRIMER (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

$77.99
Chrome Ceramic (1 Quart)

GLOSS BLACK CERAMIC (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

$99.00
Gray Ice Ceramic (1 Pint)
GRAY ICE CERAMIC 1 PT ~ HIGH TEMPERATURE STABLE EXHAUST COATING

  • LOWER GLOSS DARK CHARCOAL FINISH, WILL HAVE A METALLIC LOOK IN SUNLIGHT AS PICTURED BELOW
  • GOOD THERMAL/CORROSION RESISTANCE
  • CERAMIC PRIMER CAN BE USED IN COMBINATION WITH GRAY ICE FOR ADDITIONAL HEAT RESISTANCE
  • APPLYING CERMA SEAL CLEAR OVER THIS PRODUCT WILL IMPART A GLOSSIER FINISH IF DESIRED

    INSTRUCTIONS ON USE
    1. Follow normal ceramic prep procedures.
    2. Prior to spraying blast with Black Beauty, Aluminum Oxide, or sand for prep (DO NOT USE GLASS BEAD).
    3. Wipe down thoroughly with acetone or MEK only and let evaporate completely. Do not use chemical degreasers/phosphatizers.
    4. Place in oven at 450F for 1 hr, remove and let cool.
    5. Apply coating with airbrush or .6-.8mm tip touch up gun. This should be done at 35-40 lbs of air pressure.
    6. Let parts air dry 30-60 minutes.
    7. Recommended cure in oven at 750F for 1 hr OR follow steps 8 & 9.
    8. Cure in oven at 450F - 500F for 1 hr. This is a partial cure at 450-500F that will allow the part to be handled for installation.
    9. Once parts are installed, take vehicle for a light drive allowing the engine to get up to operating temp for at least 1 hour. The heat from the engine will finish curing the parts at 750F or higher.

    *Regardless of cure method, do not place parts in an already heated oven as it will cause solvent pop.

  • $41.95
    Gray Ice Ceramic (1 Quart)

    GLOSS BLACK CERAMIC (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

    $92.50
    Shiny Aluminum Ceramic (1 Quart)

    GLOSS BLACK CERAMIC (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

    $120.00
    Turbo Black (1 Quart)
    TURBO BLACK (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.
    $99.95
    Turbo Blue (1 Quart)

    GLOSS BLUE CERAMIC (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

    $97.95
    White Ceramic (1 Quart)

    GLOSS BLACK CERAMIC (1 QUART) ~ HIGH TEMPERATURE EXHAUST SYSTEM COATING.

    $120.00
    Copyright 2017. All Rights Reserved.
    Paypal
    Visa
    Amex
    Mastercard
    Discover