-
WATER BASED, NON FLAMMABLE CORROSION AND CHEMICAL RESISTANT FRICTION REDUCING COATING. -
OUTPERFORMS STANDARD DRY FILM LUBRICANTS. -
DESIGNED FOR ANY RIGID OR SEMI RIGID SURFACE EXPERIENCING SLIDING, ROTATING OR OSCILLATING FRICTION. -
WITHSTANDS 350,000+ PSI LOADS AND 1600F+TEMPS. -
GREAT FOR LIGHT, MEDIUM, & HEAVY DUTY APPLICATIONS WITH A WIDE RANGE OF OPERATING TEMPS, LOADS, & SPEEDS. -
SURVIVES REPEATED EXPANSION AND CONTRACTION CAUSED BY CYCLIC HEATING AND COOLING. -
DESIGNED TO HAVE CURED FILM THICKNESS OF <.001. -
CLEANS UP EASILY WITH WATER PRIOR TO CURING. -
ACQUIRES GLASS LIKE FINISH IN USE.
-
Follow normal ceramic prep procedures. -
Prior to spraying blast with Black Beauty, Aluminum Oxide, or sand for prep (DO NOT USE GLASS BEAD). -
Wipe down thoroughly with acetone or MEK only and let evaporate completely. Do not use chemical degreasers/phosphatizers. -
Place in oven at 450F for 1 hr, remove and let cool. -
Apply coating with airbrush or .6-.8mm tip touch up gun. This should be done at 50-60 lbs of air pressure. -
Let parts air dry 30-60 minutes. -
Cure in oven at 350F for 1 hr.